24k gold stud earrings with black patterned kimono fabric

These earrings were created using a vintage kimono fabric. The black silk, which features white lines and orange, yellow and white colored spots was placed inside a 24K gold plated earring bezel and carefully coated with epoxy. The epoxy will preserve the beautiful fabric and keep it from being exposed to moisture.

*please note that these earrings are being offered at a discounted price due to small bubbles in the resin. These bubbles are difficult to see unless looking closely at the earring and can not be seen when the earring is worn*

The earring bezels are created with stamped brass that is plated with 24k gold. The earring findings are carefully oxidized to create an "antique" gold finish. The posts and clutches on the earrings are surgical steel and are hypo-allergic. The entire earring is lead and nickel free and was made in the U.S.A..
Dimensions:

11mm post
13.7 mm outer diameter of bezel
11.1 mm inside diameter of bezel.

Please note that these earrings are created using a vintage fabric. These are the actual earrings available for purchase.

Earrings come in a black box.

Gift wrapping for jewelry items can be purchased here:
www.twiceuponatimedesign.com/listing/615231243/gift-wrapping-for-jewelry

Epoxy care: Please store earrings away from sunlight and do not expose to extreme temperatures. If earrings are exposed to high temperatures (for example: hot car on sunny day) the epoxy may become tacky. This tackiness should resolve itself after the earrings are allowed to cool. Please remove earrings before bathing or swimming. Epoxy surface can be shined and cleaned using a soft cloth and plastic polish (Novus plastic polish is very good) If the surface of the resin becomes soiled, it can be gently washed using a mild dish soap and warm water.

Store away from moisture.

Please note that colors will vary by monitor.